How To Assign A Static Ip On Windows 7

How to configure a Static IP Address for Windows seven, eight, XP or Vista

Windows 7 or Windows eight.x

To change the computer's IP address in Windows seven, type network and sharing into the Search box in the First Menu and select Network and Sharing Eye when it comes up. If you are in Windows viii.x it will be on the Beginning Screen itself, like the screenshot at the top of this article.

Then when the Network and Sharing Center opens, click on Change adapter settings. This will be the aforementioned on Windows 7 or eight.x.

Correct-click on your local adapter and select Properties.

In the Local Surface area Connection Properties window highlight Internet Protocol Version 4 (TCP/IPv4) then click the Properties push.

At present select the radio button Apply the following IP accost and enter in the right IP, Subnet mask, and Default gateway that corresponds with your network setup. So enter your Preferred and Alternating DNS server addresses. Here we're on a dwelling network and using a unproblematic Grade C network configuration and Google DNS.

Check Validate settings upon go out so Windows can find any issues with the addresses yous entered. When you're finished click OK.

At present shut out of the Local Area Connections Properties window.

Windows 7 will run network diagnostics and verify the connection is proficient. Here nosotros had no problems with it, but if you did, you could run the network troubleshooting wizard.

Now you lot can open the command prompt and do an ipconfig  to see the network adapter settings accept been successfully changed.

Windows Vista

Changing your IP from DHCP to a Static accost in Vista is similar to Windows 7, but getting to the correct location is a bit different. Open the Start Carte du jour, right-click on Network, and select Properties.

The Network and Sharing Center opens…click on Manage network connections.

Right-click on the network adapter you want to assign an IP accost and click Backdrop.

Highlight Cyberspace Protocol Version four (TCP/IPv4) and so click the Backdrop push button.

Now change the IP, Subnet mask, Default Gateway, and DNS Server Addresses. When you lot're finished click OK.

You'll demand to close out of Local Expanse Connection Backdrop for the settings to go into event.

Open the Control Prompt and do an ipconfig to verify the changes were successful.

Windows XP

In this instance we're using XP SP3 Media Center Edition and changing the IP address of the Wireless adapter.

To set a Static IP in XP right-click on My Network Places and select Backdrop.

Right-click on the adapter yous want to set the IP for and select Properties.

Highlight Internet Protocol (TCP/IP) and click the Backdrop button.

At present modify the IP, Subnet mask, Default Gateway, and DNS Server Addresses. When you're finished click OK.

You will need to close out of the Network Connection Properties screen before the changes go into effect.

Again you tin verify the settings by doing an ipconfig in the command prompt. In example yous're not sure how to do this, click on Start then Run.

In the Run box type in cmd and click OK.

Then at the prompt type in ipconfig and hit Enter. This will show the IP accost for the network adapter you lot changed.

If you have a pocket-sized office or dwelling house network, assigning each computer a specific IP accost makes it a lot easier to manage and troubleshoot network connection problems.

Source: http://www.elkor.net/articles/static_ip/

Posted by: goodssupostabothe.blogspot.com

Share this post